                  CDCOPY.EXE V3.800 (C) by Markus Barth
                  =====================================

    This module allows you to write audio-tracks from CD
    to disk. Registered users are able to write these files
    to a CD-Writer.

    Running under Windows-95 the program only works
    with SCSI or ATAPI-CDROM/CD-R, which support this
    special mode.

    Using WINDOWS-NT it is possible to use the generic WIN32
    interface to read the CDDA-tracks. By default, the module
    starts detecting an ASPI-interface. If it is not available
    the generic interface is used.

    The following hardware was tested:
    Adaptec 2940, Plextor CD-ROM 8XCS,
                  RICOH 1420C,
                  TOSHIBA 3401
                  PIONEER DR-U24X (Reads CDDA 3X!!!)
                  UltraPlex       (Reads CDDA 25X!!)

    It's fully functional under Windows-95 and Windows-NT 3.51/4.x.

    For both operating systems I used EZ-SCSI 4.00, 4.01
    as ASPI-interfaces.

    The following versions were tested:

    WNASPI32.DLL    22528  -> EZ-SCSI 4.01
    WNASPI32.DLL    21504  -> EZ-SCSI 4.00

    Attention - please copy the CDCOPY.INI file to the Windows / Winnt
    directory!
    Information about the configuration and usage of the module is
    located in the attached helpfile (CDCOPY.HLP).

    If you have any suggestions or errors reports please feel free
    to send me an e-mail. The actual version of CDCOPY is always
    available at http://members.aol.com/mbarth2193.
    Please send feedback about supported drives!

    If you report any problems, please send the following
    information:

    Version of CDCOPY you use
    Vendor of your CDROM/CDR
    Operating system
    Which interface you use ASPI or WIN32 for Windows-NT


    Credits:
    Special thanks to A. Katranis (A.Katranis@gmx.net) for 
    excessive testing and permanent incentive.


                               Attention!

    Starting with version 3.701 I have to change the Freeware
    status to Shareware. Excessive bills for my internet
    activities doesn't allow me to improve CDCOPY for free.
    Answering many e-mails, updates etc. are too expensive.

    So if you want to make the CDCOPY-project go further
    send 20 US $ to:

    Markus Barth
    Holzmarkt 2
    52511 Geilenkirchen
    (Germany)

    Profit-making organizations may use this software only with
    explicit written permission with payment to the author.

    M. Barth - mbarth2193@aol.com

    Versions:
    3.800 - Batchmdoe for several drives, pregab setting
    3.711 - minor error corrections
    3.710 - Playlistgeneration, MITSUMI CD-R, alternate Matsushita mode,
            error proxyserver, time information, filename template
    3.709 - minor error corrections, and enhancements
    3.706 - Extended ATAPI-support - many new drives, tracktime
            Support for Xing MPEG Encoder, Proxyserver support,
    3.703 - Albumname, http-port modification
    3.702 - Error Toshiba-Powermode
            Some error-corrections
    3.701 - http-protocoll for cddb access, quickmode option
            powermode, speed information, advanced options
    3.608 - Supress 0 samples, SCSI-Info, error NEC drives,
            minor enhancements, speedselection, support
            for IBM, Cyber drives
    3.606 - error corrections
    3.605 - RICOH MP drives, MP3-ID TAG, DAO-CUE-Sheet
            generation
    3.603 - Corrected some bugs
    3.602 - Jitter correction using WIN32 interface,
            statusinformation during CDDB communication
    3.600 - Writing of MP3-WAV files through L3CODEC of
            Fraunhofer Inst., Path for CDDB-files,
            Options "Save tracknumber", "Save artist"
    3.505 - Submission of new CD-information to CDDB
    3.502 - Buffered reading for some drive-types
            fixed some minor bugs
            MP3CompPath - variable in CDCOPY.INI
    3.500 - Read artist, title etc. from internet-database
            CDDB, support for ATAPI-interface for Windows-95,
            support for MATSHITA/PANASONIC drives.
    3.001 - Call MP3-Compressor to generate MP3 - format
    3.000 - Save options
            Jitter correction for some drives
    2.005 - Select/Deselect whole CD, retry failed reads
            speed up reading ASPI-interface for some drive-types
    2.003 - Corrected some bugs
    2.002 - Select down to frame using track excerption
    2.001 - Support for TEAC (SCSI) drives
    2.000 - Support of MPG format (MPEG 1 layer 2)
            Extreme small files and extreme slow when packing
            Best MPG - Player : MAPLAY
            http://www-inst.eecs.berkeley.edu/~ctsay/mp2win32.html
    1.700 - Added space information for tracks
    1.604 - Corrected error reading non-buffered mode using generic
            interface
    1.603 - Added support for HITACHI drives
    1.602 - Corrected some bugs
    1.600 - Support for RICOH drives (ASPI)
    1.500 - Choice of CDROMs/CDRs using a combobox and
            buffered reading using generic interface
    1.400 - Save tracks using title of CDPLAYER.INI or chosen name
    1.300 - Added tooltips, nicer buttons
            Dialog to save a part of a track
    1.200 - Saving soundfiles as WAV, AU or RAW
            Classic-mode (Writing subsequent tracks of live or
            classic-CD in one file without pause)
    1.100 - IDE-Support using generic WIN32 interface
    1.005 - Support for HP-Writer
    1.004 - Overread defect sectors
            Show content of CDPLAYER.INI if available
